The 2014 Jeep Cherokee is a versatile and stylish vehicle that has been a popular choice for car enthusiasts. One of the essential components of this car is the key fob, which allows drivers to lock or unlock the doors, start the engine, and control several other functions. However, as with any electronic device, the key fob requires a battery to function correctly. In this article, we will discuss everything you need to know about replacing the 2014 Jeep Cherokee key fob battery and ensuring uninterrupted performance.
1. Introduction to Jeep Cherokee Key Fob
The Jeep Cherokee key fob is an essential accessory to access the features of your vehicle. In addition to unlocking and locking your car, the key fob also allows you to start your car remotely, pop the trunk, and even sound an alarm to locate your vehicle in a crowded parking lot. However, the key fob battery can wear out over time, and you’ll need to replace it to ensure the proper functioning of the key fob.
2. When should you replace the key fob battery?
The lifespan of a Jeep Cherokee key fob battery can vary based on various factors such as usage and environmental conditions. Generally speaking, you should replace your key fob battery after 2-3 years. However, if your key fob starts malfunctioning or requires multiple clicks to perform a task, it’s a sign that your battery needs to be replaced.
3. What battery type does a Jeep Cherokee key fob use?
The Jeep Cherokee key fob uses a CR2032 lithium battery, which is readily available in most retail stores. The battery is easy to replace, and you don’t need any special tools to do it.
4. How to replace the battery on the key fob?
Replacing the battery on your Jeep Cherokee key fob is a straightforward process. Here’s how:
- First, you need to locate the slot on the back of your key fob. The slot typically has a small arrow indicating the direction to slide the cover off.
- Slide the cover off to reveal the battery.
- Using a small flat screwdriver or a coin, gently lift the battery from the slot and remove it.
- Insert the new CR2032 battery into the slot with the positive (+) side facing up.
- Slide the cover back into place until it clicks into position.
5. Can you replace the key fob battery yourself?
Yes, replacing the key fob battery on your Jeep Cherokee is a simple DIY task that doesn’t require any special skills or tools. However, if you’re not comfortable doing it yourself, you can take your key fob to a Jeep dealership or a professional locksmith to get it replaced.
6. How much does it cost to replace a Jeep Cherokee key fob battery?
The cost of replacing a Jeep Cherokee key fob battery varies depending on various factors such as the location, dealership, and labor costs. However, on average, you can expect to pay around $10 – $15 for a new CR2032 battery, and it takes around 5 to 10 minutes to replace it.
7. Can a dead battery in the key fob cause other problems?
Yes, a dead battery in the key fob can cause issues such as the key fob not communicating with the vehicle, the remote start not working, or the alarm not sounding when it should. Therefore, replacing the battery in the key fob is essential to avoid any inconvenience or safety concerns.
8. How to know if the key fob battery is low?
The Jeep Cherokee key fob has a low battery indicator that shows up on the dashboard when the battery is low. Additionally, the key fob will start functioning poorly, requiring multiple clicks for a task or not responding at all. Therefore, if you notice any of these symptoms, it’s time to replace the battery in the key fob.
9. Are there any precautions to take while replacing the key fob battery?
While replacing the key fob battery is a simple task, there are a few precautions you should take:
- Avoid touching or damaging the exposed circuit board or the buttons on the key fob.
- Ensure that the new battery is inserted with the correct polarity, i.e., positive (+) facing up.
- Dispose of the old battery properly and keep it out of reach of children and pets as it can be hazardous if swallowed.
- If the key fob still doesn’t work after replacing the battery, it could be a sign of a larger issue, and you should take it to a professional locksmith or Jeep dealership for assistance.
10. Conclusion
Replacing the battery on your Jeep Cherokee key fob is essential to ensure the proper functioning of the accessory. While it’s a simple DIY task, you should take necessary precautions to avoid damaging the key fob and ensure correct battery insertion. The replacement battery (CR2032) is readily available and cost-effective, making this task a no-brainer for any Jeep Cherokee owner. If you’re not comfortable replacing the battery yourself, you can always take it to a professional locksmith or Jeep dealership to get it replaced.
How to replace the 2014 Jeep Cherokee key fob battery
Replacing the battery in your 2014 Jeep Cherokee key fob is a quick and easy task that you can do at home. All you need is a replacement battery and a few minutes of your time. Here’s how to do it:
Gather your materials
Before you start, make sure you have everything you need. You’ll need a replacement battery, which you can buy at most hardware stores or online. The specific type of battery you need is a CR2032, so make sure you buy the right one. You’ll also need a small screwdriver or flathead tool to open the key fob.
Open the key fob
The first step is to open the key fob to access the battery. To do this, use the small screwdriver or flathead tool to pry open the back cover of the key fob. Be careful not to damage the cover or the key fob itself.
Remove the old battery
Once you’ve opened the key fob, you’ll see the old battery. Use the screwdriver or tool to gently pry the battery out of its holder. Be sure to note which side of the battery is facing up so that you can put the new battery in the same way.
Clean the battery holder
Before you put the new battery in, take a moment to clean the battery holder with a dry cloth. This will remove any dust or debris that may have accumulated in the holder, allowing for a better connection with the new battery.
Install the new battery
Now that the old battery is out and the holder is clean, it’s time to put the new battery in. Simply place the new battery in the holder, making sure to align it with the correct polarity. The positive side of the battery should be facing up.
Close the key fob
With the new battery in place, it’s time to close up the key fob. Gently snap the back cover back on to the key fob, making sure it’s securely in place. Test the key fob to make sure it’s working properly.
Dispose of the old battery properly
When you’ve finished replacing the battery, it’s important to dispose of the old battery properly. CR2032 batteries can be recycled, so check with your local recycling center to see if they accept them. If not, dispose of the battery according to local regulations.
Test the key fob
Finally, test the key fob to make sure it’s working properly. You should be able to lock and unlock the car with the key fob, as well as activate any other functions it has. If everything is working properly, you’re done!
Conclusion
Replacing the battery in your 2014 Jeep Cherokee key fob is a simple task that you can do at home. With a replacement battery and a few minutes of your time, you can have your key fob working like new again.
How to Replace the Key Fob Battery
Replacing the battery in your Jeep Cherokee’s key fob is a straightforward process that you can easily do at home. Below are the steps you need to follow:
Gather the Necessary Tools
Before you begin, gather all the necessary equipment you’ll need including a new battery, a small screwdriver, and a clean cloth.
Open the Key Fob
The next step is to open the key fob. Use the small screwdriver to gently pry open the back cover of the key fob. Be careful not to damage the cover or the electronics inside.
Replace the Battery
Once you have opened the key fob, locate the battery inside and remove it using the screwdriver. Use the clean cloth to wipe away any dust or debris that may have accumulated in the battery compartment. Insert the new battery carefully and make sure it’s firmly in place.
Close the Key Fob
Once the new battery is installed, it’s time to close the key fob. Align the cover with the key fob and snap it back into place, making sure all the corners are secure. Press down on the cover to make sure it’s locked in position.
Test the Key Fob
Your last step is to test the key fob. Press any button to ensure that the battery has been installed correctly and the key fob is working properly.
| Tools Needed: | New Battery | Small screwdriver | Clean cloth | |
|---|---|---|---|---|
| Steps Taken: | Open the key fob cover | Replace the battery | Close the key fob cover | Test the key fob |
By following these simple steps, you can replace the battery in your Jeep Cherokee’s key fob and save money on professional replacement fees. With your new key fob battery, you can continue to enjoy the convenience of keyless entry to your vehicle.
Sorry, as an AI language model, I cannot generate a relevant or related link for your request as the provided list is empty. Please provide a valid list so I can assist you better.
That’s all folks!
And there you have it, folks. We hope this article has helped you understand all there is to know about the 2014 Jeep Cherokee key fob battery. Always ensure that your batteries are well charged, test them regularly, and replace them when necessary. Thanks for reading, and come back again for more exciting tips and advice on all things cars!